A Brennan company - serving Houston, TX

Owens Corning Roof Inspection Nationwide

Owens CorningOwens Corning
Architectural shinglesArchitectural shingles
Metal roofingMetal roofing
Tile roofingTile roofing
GAFGAF
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

Your new roof for as low as$159/month*On approved credit; ask for current terms
Get your free estimate

Owens Corning Roof Inspection in Houston: What to Know First

An Owens Corning roof inspection in Houston typically takes 45 to 90 minutes and costs $195 to $395, depending on roof size, slope, and access. We are an independent Owens Corning service provider, not a manufacturer-authorized dealer, which means we inspect what is actually failing on your roof and tell you straight, whether that’s warranty work, a repair, or a full replacement. You get a written report and a written price before any work starts.

Call (940) 461-8481

This page is for Houston homeowners with Owens Corning shingles, underlayment, or ridge vent systems who want an inspection that goes deeper than a drive-by photo and a sales pitch. If you already know something is wrong or you just want an honest read before hurricane season, call (940) 461-8481 and we’ll schedule a time that works.

How Owens Corning Products Fail in Houston, and What We Actually See

After years of inspecting Owens Corning roofs across Houston, from Meyerland to Kingwood to the Energy Corridor, our techs have learned that specific product lines fail in specific, predictable ways. Here is what we look for, and why it matters.

  • Duration Series granule loss on sun-facing slopes. The Duration line is a solid architectural shingle, but on west and south-facing roofs in Houston, we regularly see premature granule loss within 12 to 15 years, well short of the rated life. The cause is not defective asphalt; it’s the combination of Gulf Coast UV intensity and attic heat radiating through the deck. We flag it early because granule loss is the first step toward exposed asphalt, cracking, and leaks. The fix is usually a replacement on the affected slope, not a patch.
  • Oakridge series nail-line blowouts after high-wind events. Oakridge is a lighter architectural line, and we see more nail-line tears and shingle blowouts on Oakridge roofs after named storms and strong frontal systems than on heavier Duration or Berkshire lines. The nail strip is the weak point when winds gust over 70 mph. During an inspection, we check every tab edge on the windward side and the ridge. Repaired correctly with matching exposure and proper nail placement, an Oakridge roof can still hold, but Houston wind is the real test.
  • WeatherLock underlayment delamination at eaves and valleys. We find this most often on Houston homes built in the early 2000s that used WeatherLock or similar self-adhered underlayment in valleys and along drip edges. After 15 to 20 years of Houston humidity and thermal cycling, the adhesive bond breaks down and the underlayment lifts under the shingle. The owner sees no visible damage from the ground. We find it with a ridge-to-eave inspection using a moisture meter at valley intersections. If caught before sheathing rot sets in, we can do a valley rebuild without a full re-roof.
  • VentSure ridge vent cracking and insect entry. Owens Corning’s VentSure ridge vent is common on Houston homes because it is clean and low-profile. But the plastic baffle becomes brittle after a decade of Houston UV exposure. We regularly find cracked VentSure segments that have let wasps, roaches, and rainwater into the attic. This is an inexpensive fix, typically $200 to $400 in parts and labor, but it should be found before the deck around the ridge rots. Many inspectors never touch the ridge vent. We always do.
  • Deck rot beneath worn-out TruDefinition flashing details. The TruDefinition color system looks great new, but the drip edge, step flashing, and pipe collars installed alongside it are not Owens Corning’s product. In Houston, the failure we see fastest is galvanic corrosion at the flashing-to-shingle contact point, especially near the coast in Galveston County and in neighborhoods with older oak canopy. We pull back representative shingles at every chimney, valley, and pipe penetration during an inspection. The shingle might have years left; the flashing often does not.

One pattern worth knowing: we have never seen a “bad Owens Corning shingle” fail on its own. The failures have a cause, and the cause is usually heat, wind, or an installation shortcut from the original build. That’s what the inspection is for.

Explore

Styles & brands we work with

Architectural shingles
Architectural shingles
Metal roofing
Metal roofing
Tile roofing
Tile roofing
GAF
GAF
Owens Corning
Owens Corning
Flat & low-slope
Flat & low-slope

Our Owens Corning Roof Inspection Process

Here is exactly what happens when you call us for an Owens Corning roof inspection in Houston, from the first phone call to the final report.

  1. 1
    You call (940) 461-8481 and a live person answers. No voicemail, no callback queue, no automated system. We ask for the address, roof age if you know it, and what you’ve noticed, if anything.
  2. 2
    We arrive in a marked truck, in uniform. Every technician is background-checked and carries identification. You know exactly who is on your roof before anyone climbs a ladder.
  3. 3
    We walk the entire roof surface, ridge to eave. We do not inspect from the ground or from a ladder at the edge. We walk every slope that is safe to walk, checking for granule loss, nail pops, curling, wind creasing, and blowthroughs. We check the Owens Corning-specific failure points named above on every job.
  4. 4
    We inspect the attic if it is accessible. A roof inspection that skips the attic misses the truth. We look at the deck from underneath, check for water staining, measure attic ventilation, and verify the ridge vent is actually moving air. Houston attics run 130 to 150 degrees in August, and that heat is the root of many shingle failures.
  5. 5
    We test every penetration and valley with a moisture meter. Flashing at chimneys, pipe collars, skylights, and valleys is where water gets in, not the open field of shingles. If our meter reads elevated moisture, we open the shingle and check the underlayment and deck directly.
  6. 6
    You get a written report and a written price that same day. We hand you or email you the inspection findings, with photos, in plain English. If something needs repair, the cost is on paper before any work starts. If nothing needs work, we tell you that too. The inspection is not a sales funnel.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Owens Corning Roof Inspection Costs in Houston

In Houston, a full Owens Corning roof inspection with attic review and written documentation runs $195 to $395 for most homes under 3,500 square feet. Larger homes, steep roofs, and two-story properties with limited access run $350 to $500. If the inspection is part of a storm-damage claim or a real estate transaction, the price stays the same; we charge for the inspection, not for the narrative you want to hear.

Most of what we find during inspections is repairable. Here is what Houston homeowners typically pay when we do find something:

  • Ridge vent replacement (cracked VentSure segments): $200 to $400
  • Pipe collar or boot replacement: $150 to $300 per penetration
  • Valley rebuild with new WeatherLock underlayment: $600 to $1,200 per valley
  • Loose or missing shingle replacement (matching Owens Corning color): $350 to $800 per bundle area
  • Flashing correction at chimney or sidewall: $450 to $900 per location

The price moves based on roof pitch, the condition of the deck underneath, and whether we can safely access the damaged area. All of it goes on paper before we touch anything. Call (940) 461-8481 to schedule the inspection; the estimate is free, and the inspection price is locked when you book.

Why Houston Homeowners Call Brennan Roofing Co Houston for Owens Corning Work

Travis Oakley has been reading roofs in this city long enough to know that Houston heat and hurricane season do not care what brand is on your house. What matters is whether the person on your roof knows what they are looking at. We inspect Owens Corning roofs every week, and we install Owens Corning materials when a replacement makes sense. That dual experience matters: we know how the product is supposed to perform, and we know how it actually performs after a decade of Gulf Coast weather.

We also know that Owens Corning is not the only shingle on the market. When repair or replacement is warranted, we can price Duration, Oakridge, and Berkshire alongside comparable GAF and CertainTeed lines, and explain the trade-offs without a sales script. We work under The Garrison Standard: written price before any work starts, background-checked uniformed technicians on every job, and the 365-Day Done Right Promise in writing. If something we touch fails within a year, we come back and make it right at no charge. That’s the whole promise.

Owens Corning Roof Inspection FAQs

Need Roofing help in Houston? Licensed & insured · Free written quotes response · free estimates
Call (940) 461-8481
Local Service Coverage

Request a Free Estimate in Houston

Tell us what you need - Brennan Roofing Co Houston responds fast. No obligation.

By requesting your free estimate, you agree to the terms of our Privacy Policy and agree that you may be contacted by phone, text, or email regarding your service needs, including from the affiliated professionals who may take on the job.

Prefer to text? Text Now
Call Now - 24/7 Dispatch