Tamko Roof Inspection Nationwide

Tamko Roof Inspection in Houston: What to Know First

An independent Tamko roof inspection in Houston typically takes 60 to 90 minutes on site, and you get a written report with photos the same day. We charge a flat inspection fee, and if we find damage that needs repair, that fee is credited toward the work. We are an independent Tamko service provider, not a manufacturer-authorized contractor, which means we call damage as we see it, not as a warranty department wants it framed.

Call (940) 461-8481

This page is for homeowners in Houston who have Tamko shingles on their roof and want someone who knows that product line well enough to spot problems before they turn into ceiling stains. If you already see granules in your gutters or a shingle in the yard after the last storm, call (940) 461-8481 and we’ll get you scheduled.

Key Takeaways

• Tamko shingles have specific failure patterns that differ from GAF, Owens Corning, and CertainTeed, and a generic inspection misses them.
• Houston’s heat and humidity age Tamko products in ways that don’t show up in cooler climates.
• Our inspection comes with a written report, photos, and a flat fee credited toward any repair we recommend.
• Every job at Brennan Roofing Co Houston starts with a written price before any work begins, and every repair is backed by our 365-Day Done Right Promise in writing.

How Tamko Products Fail, and How We Fix Them

Tamko builds a solid shingle. But around Houston, we see the same failure patterns repeat often enough that we know exactly where to look before we even set a ladder. Here’s what we find on real roofs in this city.

• Heritage series granule loss at the shingle edges. On Tamko Heritage and Heritage Premium roofs, we frequently see heavy granule loss along the exposed edge of the shingle, not across the whole field. Houston’s UV load is brutal, and the asphalt at the edge oxidizes faster than the rest. Left alone, the fiberglass mat starts to show, and you’re looking at a total tear-off sooner than you should be. We flag it early, document it, and if it’s localized, we can often extend the roof’s life with targeted replacement instead of a full reroof.
• Elite Glass-Seal sealant strip failure after extended heat. Tamko Elite Glass-Seal shingles rely on a thermal sealant strip to bond each course to the one below. In Houston summers, we’ve watched that sealant lose its grab after enough 100-degree days, which leaves tabs loose and flapping in the first good wind. A loose tab is a wind-driven rain leak waiting to happen. We check sealant activation on every Tamko inspection and re-seal where the bond has failed.
• StormGuard and MetalWorks valley flashing separation. On Tamko systems where StormGuard underlayment meets metal valleys, we see separation at the metal-to-underlayment transition, especially on older installs where the metal wasn’t primed. Water gets under the valley metal and travels toward the decking. We inspect valleys on every Tamko job, not just the shingle field.
• Fastener over-driving on decking around vents and pipes. We see this on Tamko and non-Tamko roofs alike, but it hits Tamko homeowners hard because the shingles don’t hide it as long. When nails are driven too deep on a soft spot in the decking, the shingle above won’t seat flat, and the mat fractures where the nail head pulls through. On a Tamko inspection, we look at every penetration, not just the ones that are already leaking.
• Improper starter strip placement. Tamko specifies a starter course along the eaves and rakes. When it’s missing or set too high, the first course of shingles doesn’t get the wind resistance it’s designed for, and Houston storms find the gap. We check the starter course as part of every Tamko inspection and replace it correctly when it’s wrong.

A roof either keeps water out or it doesn’t, everything else is details. Those details are what we’re there to find.

Our Tamko Roof Inspection Process

Here’s how a Tamko inspection with Brennan Roofing Co Houston actually goes, step by step, from the first call to the moment we hand you the report.

1. 1
   You call (940) 461-8481. A live person answers. No voicemail, no callback queue. We schedule a window that works for you, and we show up inside it.
2. 2
   We walk the property with you. Before we put a ladder on the roof, we walk the perimeter together so you can point out anything that’s been worrying you: a stain on the ceiling, granules in the gutter, a shingle you found in the yard after the last storm in Houston.
3. 3
   We get on the roof and inspect every surface. Shingle field, ridges, hips, valleys, flashing at chimneys and skylights, pipe boots, vents, drip edge, and decking where accessible. On Tamko roofs, we pay special attention to the failure points listed above.
4. 4
   We document everything with photos. You get a written report with pictures of every issue we find, ranked by urgency so you know what needs attention now and what can wait.
5. 5
   We walk you through the numbers. If repairs are needed, you get a written price before any work starts. No price shifts at the door. If you decide to proceed, we’ll schedule the repair and handle it under our 365-Day Done Right Promise.
6. 6
   We leave the site clean. No nails in the yard, no debris on the deck, no mess. That’s part of the job.

What Tamko Roof Inspection Costs in Houston

Our Tamko roof inspection in Houston carries a flat fee, and that fee is credited toward any repair we recommend. For most single-family homes in Houston, that inspection fee falls in the $150 to $250 range depending on roof size and accessibility.

When we find damage, here’s what typical Tamko repairs run in the Houston market:

• Shingle tab re-seal: $75 to $150 if caught early, covering a handful of loose tabs.
• Pipe boot or vent flashing replacement: $250 to $450, depending on the number of penetrations and the condition of the surrounding shingles.
• Valley flashing repair: $400 to $700, including new metal and proper underlayment integration.
• Localized shingle replacement: $350 to $800, depending on the size of the affected area and whether matching Tamko stock is available locally.
• Starter strip correction: $300 to $600 for a typical Houston ranch-style roofline.

The big variable is decking damage. If water has been getting under the Tamko shingles for a while, the plywood underneath may need replacement, and that moves the price. You’ll see that number on paper before we touch anything. Call (940) 461-8481 for an exact quote. Estimates are free.

Why Houston Homeowners Call Brennan Roofing Co Houston for Tamko Work

We’re not the biggest roofing company in Houston, and that’s not the point. The point is that when we put our name on a Tamko inspection or repair, we stand behind it in writing. Every job starts with a written price before any work begins. Every repair is backed by our 365-Day Done Right Promise: if it fails within a full year, we come back and fix it at no charge. That’s not a handshake, that’s a line on the page you keep.

You’ll also know exactly who is on your roof. Every technician we dispatch is background-checked and arrives in uniform. Our phones are answered by a live person around the clock. And because we install materials from GAF, Owens Corning, CertainTeed, and Tamko, we’re not pushing you toward one brand, we’re matching the product to your roof and your budget. Travis Oakley built this crew to read roofs straight, no upselling damage that isn’t there, no downplaying what actually has to come off.

FAQs